Kedu ihe bụ TRS Jack? Ntuzi dị mfe maka ntụnye aka – mgbanaka – mgbanaka ụda olu

Isi ihe eji eme ihe
• Jọkịta TRS na-enye gị ohere ikwunye ekweisi stereo, mee ọdịyo ziri ezi, ma jiri otu oghere kpachie mmetụta.
• Nha a na-ahụkarị bụ ¼″ (6.35 mm), ⅛″ (3.5 mm), na 2.5 mm—chọrọ nkọwapụta IEC ma ọ bụ MIL-SPEC maka ngwa ngwa.
• Stereo (enweghị nha nha) na-eji ndụmọdụ = aka ekpe, mgbanaka = aka nri, Sleeve = ala; mono kwesịrị ekwesị na-eji ndụmọdụ = ọkụ, mgbanaka = oyi, Sleeve = ala iji belata mkpọtụ.
• Nkịta ogbe nwere ike inwe mgbanaka fanye, latches kpochie, ma ọ bụ okpu uzuzu—kpachie akị ahụ nke ọma wee jiri enyemaka nhịahụ.
• Ndozi ngwa ngwa: kọntaktị dị ọcha na mmanya isopropyl, gbanwee jakị ndị na-eyi, ma lelee ọkwa ike-ike tupu ịtinye mic condenser.

 
Kedu ihe ntumọ, mgbanaka, na aka aka na-eme?
Cheedị echiche na njedebe nke plọg ekweisi gị: ejiri mgbanaka ojii kewara ya na ngalaba ọla atọ. Ndị ahụ bụ kọntaktị NDỤMỌDỤ, Ring, na Sleeve n'ime oghere.
• Ndụmọdụ (Ihe mgbaàmà +/ aka ekpe): Na-ebu ọdịyo ọwa aka ekpe ma ọ bụ akụkụ dị mma nke mgbama guzozie eguzozi.
• Mgbanaka (Ihe mgbanaka - / aka nri): Na-ebu ọdịyo ọwa aka nri ma ọ bụ usoro ntụgharị maka mono kwụ ọtọ.
• Aka aka (ala): Na-arụ ọrụ dị ka ụzọ nloghachi na ọta megide nnyonye anya.
N'ime jaket nwanyị, obere mmiri na-ejide na mgbanaka mkpuchi ahụ ka plọg wee guzosie ike. Nkịta ndị bụ isi na-eji nickel plating maka ịdịte aka; fancier gold plating egbutu corrosion na mma conductivity. Ọtụtụ jakị ndị na-azụ ahịa na-adịru ihe dị ka ntinye 5,000 - ụdị pro nwere ike karịa 10,000, nke ị ga-achọ ma ọ bụrụ na ị na-eme njem ma ọ bụ na-atụgharị eriri ụbọchị niile.

 
Kedu nha nke m kwesịrị ịzụrụ?
Jakị TRS na-abịakarị na nha atọ:
1.¼″ (6.35 mm): Ọkọlọtọ na guitar, igwekota, na patchbays studio na US.
2.⅛″ (3.5mm): Achọtara na kọmpụta, ekwentị (ebe ọ ka dị), obere ndekọ ndekọ, na ntinye ọdịyo DSLR.
3.2.5 mm: Ụfọdụ ekweisi ụlọ akwụkwọ ochie na redio ụzọ abụọ na-eji.
Maka nhazi ụlọ, chọọ IEC 60603-11-ndabere oghere. Ọ bụrụ na ịchọrọ ngwo siri ike maka ikpe okporo ụzọ ma ọ bụ igwe mgbasa ozi, gaa maka MIL-SPEC- jacks gosiri na-ejide ujo, ịma jijiji na oke okpomọkụ. Ị ga-ahụ ụdị PCB-mount (ọdụ na-ere ahịa) na chassis-mount nke nwere flanges na lugs ma ọ bụ ịghasa ọnụ.

 
Kedu ka m ga-esi agwa Stereo na wiring kwụ ọtọ?
Ọ bụ ezie na ha abụọ na-eji kọntaktị atọ, stereo (enweghị nha nha) na ihe mono waya dabara adaba dị iche iche:

• Stereo (Enweghị nha nha): Plọg na-egwu dị mfe maka ekweisi na ngwaọrụ mkpanaka. Naanị dobe eriri n'okpuru 10 ft ka ịzenarị nhịahụ.
• Mono ziri ezi: Ọ dị mma maka eriri studio patch na agwọ ogbo. Mgbama abụọ na-apụ apụ na-akagbu mkpọtụ ewelitere n'ime ogologo oge - waya ga-akwụsịrịrị na ntinye dị iche.

Kedu ihe Pụrụ Iche Banyere Ogwe-Ugwu na Fanye Jacks?
Kedu otu esi etinye Jacks na-arụ ọrụ?
Ihe njikwa ihe nkiri Studio na-enwekarị “ịtinye” isi ihe iji kwachie na compressors ma ọ bụ EQ. Jack ntinye TRS nwere ntakịrị ngbanwe n'ime: enweghị plọg = ntụgharị nkịtị, nkwụnye = kewara mgbaama. Jiri eriri TRS-to-dual-TS “Y”—Ndụmọdụ na-eziga, mgbanaka na-alaghachi, Sleeve bụ ala.
Kedu maka mgbachi na mkpuchi mkpuchi uzuzu?
Na njegharị, ọ dịghị ihe dị njọ karịa eriri na-apụta n'etiti ihe ngosi. Nkpọchi TRS jakị na ebe. Ihe mkpuchi uzuzu na-eme ka jakị gị dị ọcha na ndekọ ubi ma ọ bụ nrụnye n'èzí.
Kedu ka m ga-esi gbanye Jack n'ime?
Soro nkọwapụta torque nke onye nrụpụta. Oke rụrụ arụ = mkpọtụ ala na-agbawa; nke siri ike = mkpuchi gbawara agbawa ma ọ bụ kọntaktị gbajiri agbagọ. Gbakwunye akpụkpọ ụkwụ enyemaka nsogbu mgbe niile ma ọ bụ mkpọgide n'azụ panel iji kwụsị ike ọgwụgwụ eriri eriri.
Ebee ka m ga-ahụ TRS Jacks na ndụ n'ezie?
• Igwe isi ụlọ Studio: Tinye mkpọ gị n'ihu ihu ihu yana amps ekweisi-¼″ TRS bụ eze.
• Ngwa ụda Live: Nsonaazụ ziri ezi na ndị na-agwakọta US na-enye ndị na-ekwu okwu ike ma ọ bụ ngwugwu IEM site na jakị TRS.
• Mmetụta Pedal & Synths: Ntinye pedal nkwupụta na-ejikarị TRS maka voltaji njikwa; ụfọdụ pedal mmepụta stereo na-ejikwa TRS.
• Igwefoto igwe: Ntinye ọnụnụ DSLR na-abụkarị 3.5 mm TRS—jide ihe nkwụnye TRRS-to-TRS maka igwe ekwentị.
• DIY Patchbays: Wulite ihu ihu dị mma nke nwere ọtụtụ jakị ¼″ iji ga-aga synths, loops FX, na oghere ọdịyo na-enweghị ịrara n'okpuru tebụl.

Kedu ka m ga-esi edozi Jack TRS na-eme mkpọtụ ma ọ bụ nke tọgbọrọ chakoo?
1.Crackling ma ọ bụ Dropouts? Tụgharịa wee tụgharịa plọg ahụ ugboro ole na ole, wee fesaa ihe nhicha kọntaktị n'ọnụ na mgbanaka—fanye ka ịgbasa ya gburugburu.
2. Sachaa Jack: Jiri akwa swab na-enweghị lint na-etinye n'ime mmanya isopropyl-ọ dịghị ihe e ji ígwè mee ma ọ bụ akwụkwọ ájá.
3. Dochie ma ọ bụrụ na achọrọ: Ọ bụrụ na esemokwu mmiri ahụ adịchaghị ike ma ọ bụ kọntaktị na-ada ada, gbanwee na jakị ọhụrụ. Ọ dị ọnụ ala karịa nchọpụta nsogbu mkpọtụ dị omimi ma emechaa.

 
Kedu maka ike na nchekwa Phantom?
• Ike Phantom (48V): Naanị jakị TRS guzozie eguzozi na igwe preamps ekwenyere maka phantom nwere ike inye mic condenser n'enweghị nsogbu. Akwụnyela 48V n'ime jakị ekweisi ọkọlọtọ.
• Nda ala: Kee ihe mgbakwasị chassis niile n'otu ebe iji kwụsị hum loops — ọkachasị dị mkpa na ebe ndị US nwere isi mmalite ike agwakọta.
• Ogo voltaji/ugbu a: Ọtụtụ jakị TRS na-ejigide ihe ruru 50 V DC na 1 A — zuru oke maka akara ụda olu yana njikwa obere voltaji dị ka mgbanaka ụkwụ ma ọ bụ MIDI n'elu TRS.

 
Ajụjụ: Ajụjụ TRS Jack kacha elu 10 gị
1.Enwere m ike ikwunye nkwụnye TRS n'ime jakị TS?
Ee, mana mgbanaka ahụ na-ese n'elu mmiri ma ọ bụ dị mkpụmkpụ n'ala, yabụ ị ga-atụfu ọwa ziri ezi ma ọ bụ mgbama kwụ ọtọ.
2.Kedu ka m ga-esi mara ọdịiche dị n'etiti TRS na TRRS?
Gụọ mgbanaka ahụ: TRS nwere mgbanaka abụọ (kọntaktị atọ); TRRS nwere mgbanaka atọ (kọntaktị anọ).
3. Will a TRS Jack na-ebu ike phantom?
Naanị ma ọ bụrụ na etinyere ya maka phantom - ọtụtụ jakị ekweisi abụghị.
4.Gịnị bụ ezigbo ọdịiche dị n'etiti TRS na XLR?
XLR na-akpọchi ebe, na-eji ntụtụ ala dị iche iche, ma na-enyekarị mgbaghara ka mma maka ogbo na ogologo ọsọ.
5.Ole plug-ins nwere ike ijikwa jakị TRS?
Jacks ọkọlọtọ na-ekwu banyere cycles 5,000; pro jacks nwere ike gafere 10,000.
6. Enwere m ike iji eriri TRS maka MIDI?
Ụfọdụ gia na-akwado MIDI n'elu TRS - lelee ntuziaka ngwaọrụ gị maka pinout ziri ezi.
7.Gịnị bụ wiwi ziri ezi maka eriri ntinye TRS?
NDỤMỌDỤ = Zipụ, Mgbanaka = Nlaghachi, Aka Aka = Ala, na-eji eriri TRS-to-2 × TS "Y".
8.Gịnị mere eriri m na-eme ka ọ dị mma ka na-ama jijiji?
Eleghị anya ihe na-akụda ala - lelee loops ala ma ọ bụ njikọ chassis na-ekwesịghị ekwesị.
9.Can I mix nickel na gold plated jacks?
Ee site na eletriki, mana ọla edo na nsọtụ abụọ ahụ na-ebelata ihe egwu corrosion, ọkachasị na gburugburu iru mmiri dị elu.
10.My Jack ele rụrụ mgbe arịọnụ-ihe na-enye?
Ị nwere ike ịkpụchasị oghere panel ma ọ bụ jiri akị na-ezighi ezi. Dochie ya na nha ziri ezi ma soro nkọwapụta torque.

 
Ị dịla njikere ịkwalite ntọlite ọdịyo gị?
Lelee nhọrọ anyị nke ọrụ dị arọ, oghere TRS nwere ọla edo - nke akwụkwọ ikike US afọ 2 kwadoro na nkwado teknụzụ efu. Chọgharịa TRS Jack Hardware

 
Ntụaka
1.Gịnị bụ eriri TRS? - Injinia ozi 
2. Ọdịiche n'etiti TS, TRS na TRRS Njikọ - Foto Movo
3.Ịghọta Njikọ TRS maka stereo Audio Signals - Lenovo 
4.Cable Conundrum: WTF bụ TRS? – Noise Engineering Blog 
5.Onye njikọ ekwentị ( audio) - Wikipedia 
6.Gịnị bụ ọdịiche dị n'etiti TS na TRS Cables? – Ụtọ mmiri 
7.TS vs TRS vs TRRS Audio Cables – Thomann Blog 
8.TS vs. TRS vs. TRRS Audio Connectors – Audio University Online
9.Gịnị bụ ọdịiche dị n'etiti TS, TRS na TRRS? – Nkwado monoprice 
10.TRS vs. TRRS – blọọgụ VCELink